m.solimanpur

Short Bioghraphy

Dr. Maghsud Solimanpur was born in Urmia on 1972 and currently is a full-time tenured Professor at the Department of Industrial Engineering, Faculty of Engineering, Urmia University, Urmia, Iran. He has received his PhD degree from the Indian Institute of Technology Delhi, New Delhi, India on 2003 and was awarded as the outstanding student by the Ministry of Science, Research and Technology. He received both MSc and BSc degrees from Sharif University of Technology, Tehran, Iran on 1997 and 1995, respectively.

He has published more than one hundred papers in different reputed international journals and different national and international conferences. His research areas of interest include optimization of manufacturing processes, location problem and facilities layout, cellular manufacturing, production planning, meta-heuristic algorithms and operations research.

Research and Education Resume

رزومه فارسی

Name and Family
Degree
Academic Degree
Department
E-mail:
Website

Academic Education/Training (3)

Journal Articles (36)

Conference Papers/Abstracts/Posters (27)

		1- 1389, A Competent Leadership Algorithm for solving flow shop group scheduling problem,3rd International Conference of Iranian Operations Research Society, تهران,ایران.
		2- 2010, A linear mathematical programming model for machine loading problem in a flexible manufacturing system,10th Iranian Conference on Manufacturing Engineering, بابل,ایران.
		3- 2014, A Model for System Reliability Optimization,The third international reliability engineering conference -IREC2014, تهران,ایران.
		4- 2006, A New Heuristic for Minimizing Makespan of Flow Shop Group Scheduling Problem,Group Technology Cellular Manufacturing Conference.
		5- 2005, A Study on the Structural Parameters of a Thermosyphonic Solar Collector,Eighth Baku international congress on Energy, Ecology , Economy"", Baku, Azerbaijan.
		6- 2012, A two-stage solution approach based on mathematical programming for designing manufacturing cells,IEOM2012, استانبول,ترکیه.
		7- 2006, Analyzing Overhaul Cycle Time of a Typical Aeroengine Obtained From Simulation,8th Middle Eastern Simulation Multiconference.
		8- 2010, Branch-and-Bound algorithm to select the best process plan in an automated manufacturing environment,10th Iranian Conference on Manufacturing Engineering, بابل,ایران.
		9- 2010, Combining Artificial Neural Network and Ant Colony Optimization for Designing Fuel- Injection Control Systems to Reduce Nox Emissions in DI Diesel Engines,13th Annual& 2nd International Fluid Dynamics Conference.
		10- 2003, Design of Cellular Manufacturing Systems: A goal Programming Approach,International Conference on Automation, Robotics and Autonomous Factories.
		11- 2009, Designing a New Integrated Dynamic Cellular Manufacturing System with Production Planning and Machine Layout,دومین کنفرانس بین المللی تحقیق در عملیات ایران.
		12- 2006, Developing a Framework for Discrete Event Simulation of Aircraft Piston Enging Overhuaul Procedures,Mesm&8th Middle Eastern Simulation Multiconferance.
		13- 2008, Lot Size Approximation in A Shop Wit Multi-Assembly Products Using Timed Petri Net,BAI2008- International Conference on Business And Information.
		14- 1390, Machine Load Balancing Based on Maximizing the Throughput in a Flexible Manufacturing Environment,سومین کنفرانس بین المللی ساخت و تولید, تهران,ایران.
		15- 2009, Muli- Objective Cell Formation and Production Planning in Dynamic Virtular Manufacturing Systems,International Conference on Business and Information.
		16- 2012, Multi-objective mathematical model for Time and Space Assembly Line Balancing Problem,IEOM2012, استانبول,ترکیه.
		17- 2009, Optimal Gate Location Corresponding to Minimum Shrinkage in Injection Modeling by Taguchi, Method,Conference on Manufacturing Engineering.
		18- 2006, Optimization of Cutting Parameters Using Genetic Algorithm,14th Annual (International) Mechanical Engineering Conference.
		19- 2010, Optimization of molding parameters by Taguchi method leading to minimum shrinkage and in-mold pressure,10th Iranian Conference on Manufacturing Engineering, بابل,ایران.
		20- 2012, Optimization of multi-pass turning operations using genetic algorithms,IEOM2012, استانبول,ترکیه.
		21- 2009, Production Planning and Cell Formation in Dynamic Virtual Cellular Manufacturing Systems with Worker Flexibility,IEEE.
		22- 2006, Project Weights Estimation Using an AHP-Based Method and Fuzzy Rule Base,2nd International Project Management Conference.
		23- 2007, Selection Optimum Drilling Sequence in Hole Making Operations Using Simulated Annealing Algorothm,15th annual (international()confernce on mechanical engineering ISME.
		24- 2008, Simulated Annealing Approach to Solve a Cellular Manufacturing System Using MDMTSP,38th International Conference on Computers and Industrial Enneneering.
		25- 2008, Solving a New Mathematical Model for Cellular Manufacturing System: Fuzzy goal Programming,IEEE. IEEM.
		26- 2006, Tabu Search Application to Single Machine Scheduling with Earliness-Tardiness Penalty Subject to Preventive Group Replacement,5th International Conference System Identification and Control Problems (SICPRO).
		27- 2006, Using Physics of the System in Verification and Vallidation of Simulation Overhaul Proccedures of a Typical Aeroengine,Mesm&8th Middle Eastern Simulation Multiconferance.

Name and Family
m.solimanpur

Degree
PHD

Academic Degree
Professor

Department
Department of Industrial Engineering

E-mail:
m.solimanpur@urmia.ac.ir

Website
http://facultystaff.urmia.ac.ir/m.solimanpur

Short Bioghraphy

Research and Education Resume

Academic Education/Training (3)

		1-PhD, 2003, Industrial Engineering,Indian Institute of Technology Delhi, New Delhi, India..
		2-MSc, 1997, Industrial Engineering,Sharif University of Technology, Tehran, Iran..
		3-BSc, 1994, Industrial Engineering,Sharif University of Technology, Tehran, Iran..

Journal Articles (36)

		1-مقصود سلیمانپور, 2016, Join server selection and replica placement in urban content delivery networks,Int.operational Research.
		2-کامران عظیمی، مقصود سلیمانپور, 2016, A heuristic method to solve the location and machine selection problem in a two dimensional continuous area,Int.J. Mathematics in Operational Research.
		3-مقصود سلیمانپور، غلامرضا منصورفر، فرزاد غیور, 2015, Optimum portfolio selection using a hybrid genetic algorithm and analytic hierarchy process,Studies in Economics and Finance.
		4-شهرام سعیدی، مقصود سلیمانپور، ایرج مهدوی، نیکبخش جوادیان, 2014, A multi-objective genetic algorithm for solving cell formation problem using a fuzzy goal programming approach,Int J Adv Manuf Technol.
		5-اشکان مزدگیر، ایرج مهدوی، ایمان سیدی بادله، مقصود سلیمانپور, 2013, Using Taguchi method to optimize differential evolution algorithm parameters to minimize workload smoothness index in simple assembly line balancing,Mathematical and Computer Modelling.
		6-مقصود سلیمانپور، اتابک علمی, 2013, A tabu search approach for cell scheduling problem with makespan criterion,International Journal of Production Economics.
		7-فهیمه بیگلری، مقصود سلیمانپور, 2013, Scaling on the Spectral Gradient Method,Journal of Optimization Theory and Applications, 2013,158.
		8-ایرج مهدوی، امین اعلایی، محمد مهدی پایدار، مقصود سلیمانپور, 2012, A new mathematical model for integrating all incidence matrices in multi-dimensional cellular manufacturing system,Journal of Manufacturing Systems2012.
		9-ایرج مهدوی، کاوه تقی زاده، مرتضی باقرپور، مقصود سلیمانپور, 2012, Modeling of multi-period multi-product production planning considering production routes,International Journal of Production Research2012.
		10-مقصود سلیمانپور، رضا راستگردانی, 2012, Minimizing tool switching and indexing times by ant colony optimization in automatic machining centers,International Journal of Operational Research.
		11-بابک شیرازی، ایرج مهدوی، مقصود سلیمانپور, 2012, Intelligent decision support system for the adaptive control of a flexible manufacturing system with machine and tool flexibility,International Journal of Production Research2012.
		12-امیرموسی اباذری، مقصود سلیمانپور، حسین ستاری, 2012, Optimum loading of machines in a flexible manufacturing system using a mixed-integer linear mathematical programming model and genetic algorithm,Computers and Industrial Engineering.
		13-مقصود سلیمانپور، حسین ستاری، امیرموسی اباذری, 2012, Optimum process plan selection via branch-and-bound algorithm in an automated manufacturing environment,International Journal of Operational Research2012.
		14-کیهان رحمانی، ایرج مهدوی، هادی مرادی، حمید خورشیدیان، مقصود سلیمانپور, 2011, A Non-dominated Ranked Genetic Algorithm for bi-objective single machine preemptive scheduling in just-in-time environment,International Journal of Advanced Manufacturing Technology.
		15-اتابک علمی، مقصود سلیمانپور، شیدا توپال اوغلو، افشین علمی, 2011, A Simulated annealing algorithm for the job shop cell scheduling problem with intercellular moves and reentrant parts,Computers and Industrial Engineering.
		16-محمدمهدی پایدار، ایرج مهدوی، سمانه ولی پور، مقصود سلیمانپور, 2011, Developing a mathematical model for cell Formation in cellular manufacturing systems,International Journal of Operational Research.
		17-ایرج مهدوی، امین اعلایی، محمدمهدی پایدار، مقصود سلیمانپور, 2011, Multi-objective cell formation and production planning in dynamic virtual cellular manufacturing systems,International Journal of Production Research.
		18-مقصود سلیمانپور، احد فروغی, 2011, A new approach to the cell formation problem with alternative processing routes and operation sequence,International Journal of Production Research.
		19-مقصود سلیمانپور، فراز برادرانی, 2011, A new heuristic for rectangular stock-cutting problem,International Journal of Operational Research.
		20- 2011, A tabu search approach for group scheduling in buffer-constrained flow shop cells,International Journal of Computer Integrated Manufacturing.
		21-ایرج مهدوی، محمدمهدی پایدار، مقصود سلیمانپور, 2011, Solving a new mathematical model for cellular manufacturing system: a fuzzy goal programming approach,Iranian Journal of Operations Research.
		22- 2010, Development of a simulation-based decision support system for controlling stochastic flexible job shop manufacturing systems,Simulation Modelling Practice and Theory.
		23- 2010, Development of a simulation-based intelligent decision support system for the adaptive real-time control of flexible manufacturing systems,Journal of Software Engineering and Applications.
		24- 2010, Solving cell formation problem in cellular manufacturing using ant colony based optimization,International Journal of Advanced Manufacturing Technology.
		25- 2009, Genetic Algorithm Approch for Solving a Cell Formation Problem in Cellular Manufacturing,Expert Systems with Application.
		26- 2009, Lot size Approximation Based on Minimising Total Delay in a Shop with Multi-Assembly Products,International Journal of Production Research.
		27- 2009, Optimisation of Cutting Parameters Using a Multi-Objective Genetic Algoritm,International Journal of Production Research.
		28- 2008, Optimal Solution for the Two-Dimensional Facility Layout Problem Using a Branch-and-Bound Algorithm,Computers & Industerial Engineering (ISI Journal).
		29- 2007, An Ant Algorithm for Optimization of Hole-Making Operations,Computers & Industrial Engineering.
		30- 2005, An Ant Algorithm for the Single Row Layout Problem in Flexible Manufacturing Systems,Computers & Operations Research.
		31- 2004, A Neuro-Tabu Search Heuristic for the Flow Shop Scheduling Problem,Computers & Operations Research.
		32- 2004, A Heuristic to Minimize Makespan of Cell Scheduling Problem,International Journal of Production Economics.
		33- 2004, A Mmulti-Objective Genetic Algorithm Approach to the Design of Cellular Manufacturing Systems,International Journal of Production Research.
		34- 2004, Ant Colony Optimization Algorithm to the Inter-Cell Layout Problem in Cellular Manufacturing,European Journal of Operational Research.
		35-Solimanpur M., Vrat P., and Shankar R., 2004, Feasibility and Robustness of Transiently Chaotic Neural Networks Applied to the Cell Formation Problem,International Journal of Production Research, 42(6), 1065-1082..
		36-Soleymanpour M., Vrat P., and Shankar R., 2002, A Transiently Chaotic Neural Network Approach to the Design of Cellular Manufacturing,International Journal of Production Research, 40 (10), 2225-2244..

Conference Papers/Abstracts/Posters (27)

		1- 1389, A Competent Leadership Algorithm for solving flow shop group scheduling problem,3rd International Conference of Iranian Operations Research Society, تهران,ایران.
		2- 2010, A linear mathematical programming model for machine loading problem in a flexible manufacturing system,10th Iranian Conference on Manufacturing Engineering, بابل,ایران.
		3- 2014, A Model for System Reliability Optimization,The third international reliability engineering conference -IREC2014, تهران,ایران.
		4- 2006, A New Heuristic for Minimizing Makespan of Flow Shop Group Scheduling Problem,Group Technology Cellular Manufacturing Conference.
		5- 2005, A Study on the Structural Parameters of a Thermosyphonic Solar Collector,Eighth Baku international congress on Energy, Ecology , Economy"", Baku, Azerbaijan.
		6- 2012, A two-stage solution approach based on mathematical programming for designing manufacturing cells,IEOM2012, استانبول,ترکیه.
		7- 2006, Analyzing Overhaul Cycle Time of a Typical Aeroengine Obtained From Simulation,8th Middle Eastern Simulation Multiconference.
		8- 2010, Branch-and-Bound algorithm to select the best process plan in an automated manufacturing environment,10th Iranian Conference on Manufacturing Engineering, بابل,ایران.
		9- 2010, Combining Artificial Neural Network and Ant Colony Optimization for Designing Fuel- Injection Control Systems to Reduce Nox Emissions in DI Diesel Engines,13th Annual& 2nd International Fluid Dynamics Conference.
		10- 2003, Design of Cellular Manufacturing Systems: A goal Programming Approach,International Conference on Automation, Robotics and Autonomous Factories.
		11- 2009, Designing a New Integrated Dynamic Cellular Manufacturing System with Production Planning and Machine Layout,دومین کنفرانس بین المللی تحقیق در عملیات ایران.
		12- 2006, Developing a Framework for Discrete Event Simulation of Aircraft Piston Enging Overhuaul Procedures,Mesm&8th Middle Eastern Simulation Multiconferance.
		13- 2008, Lot Size Approximation in A Shop Wit Multi-Assembly Products Using Timed Petri Net,BAI2008- International Conference on Business And Information.
		14- 1390, Machine Load Balancing Based on Maximizing the Throughput in a Flexible Manufacturing Environment,سومین کنفرانس بین المللی ساخت و تولید, تهران,ایران.
		15- 2009, Muli- Objective Cell Formation and Production Planning in Dynamic Virtular Manufacturing Systems,International Conference on Business and Information.
		16- 2012, Multi-objective mathematical model for Time and Space Assembly Line Balancing Problem,IEOM2012, استانبول,ترکیه.
		17- 2009, Optimal Gate Location Corresponding to Minimum Shrinkage in Injection Modeling by Taguchi, Method,Conference on Manufacturing Engineering.
		18- 2006, Optimization of Cutting Parameters Using Genetic Algorithm,14th Annual (International) Mechanical Engineering Conference.
		19- 2010, Optimization of molding parameters by Taguchi method leading to minimum shrinkage and in-mold pressure,10th Iranian Conference on Manufacturing Engineering, بابل,ایران.
		20- 2012, Optimization of multi-pass turning operations using genetic algorithms,IEOM2012, استانبول,ترکیه.
		21- 2009, Production Planning and Cell Formation in Dynamic Virtual Cellular Manufacturing Systems with Worker Flexibility,IEEE.
		22- 2006, Project Weights Estimation Using an AHP-Based Method and Fuzzy Rule Base,2nd International Project Management Conference.
		23- 2007, Selection Optimum Drilling Sequence in Hole Making Operations Using Simulated Annealing Algorothm,15th annual (international()confernce on mechanical engineering ISME.
		24- 2008, Simulated Annealing Approach to Solve a Cellular Manufacturing System Using MDMTSP,38th International Conference on Computers and Industrial Enneneering.
		25- 2008, Solving a New Mathematical Model for Cellular Manufacturing System: Fuzzy goal Programming,IEEE. IEEM.
		26- 2006, Tabu Search Application to Single Machine Scheduling with Earliness-Tardiness Penalty Subject to Preventive Group Replacement,5th International Conference System Identification and Control Problems (SICPRO).
		27- 2006, Using Physics of the System in Verification and Vallidation of Simulation Overhaul Proccedures of a Typical Aeroengine,Mesm&8th Middle Eastern Simulation Multiconferance.