• Name and Family
    • sh.khalilarya
  • Degree
    • PHD
  • Academic Degree
    • Professor
  • Department
    • Department of Mechanical Engineering
  • E-mail:
    • sh.khalilarya@urmia.ac.ir
 Short Bioghraphy           
         
     Research and Education Resume
رزومه فارسی
Journal Articles (45)
Conference Papers/Abstracts/Posters (30)
Research Projects (1)
   
  • Name and Family
  • sh.khalilarya
  • Degree
  • PHD
  • Academic Degree
  • Professor
  • Department
  • Department of Mechanical Engineering
  • E-mail:
  • sh.khalilarya@urmia.ac.ir
 
 
 
         
     Research and Education Resume

Journal Articles (45)

1-شهرام خلیل آریا, 2016, A comprehensive second law analysis for tube-in-tube helically coiled heat exchangers,Experimental Thermal and Fluid Science.

2-شهرام خلیل آریا, 2016, Energy and exergy analyses of a novel combined heating, power and absorption-ejector refrigeration cycle driven by biomass fuel,Int. J. Exergy, 4,19.

3-فرید سپهریان آذر-شهرام خلیل آریا, 2016, Entropy and exergy analysis of a Ranque–Hilsch vortex tube with two vortex chambers,Int. J. Exergy.

4-محمدامین رکن شریفی - شهرام خلیل آریا, 2016, Exergoeconomic evaluation and optimisation of a novel combined power and absorption-ejector refrigeration cycle driven by natural gas,Int. J. Exergy, 2,19.

5-شهرام خلیل آریا, 2015, Appraisal of artificial neural networks to the emission analysis and prediction of CO2, soot, and NOx of n-heptane fueled engine,Journal of Cleaner Production.

6-شهرام خلیل آریا, 2015, On the modeling of convective heat transfer coefficient of hydrogen fueled diesel engine as affected by combustion parameters using a coupled numerical-artificial neural network approach,International journal o f hydrogen energy.

7-شهرام خلیل آریا, 2015, Towards modeling of combined cooling, heating and power system with artificial neural network for exergy destruction and exergy efficiency prognostication of tri-generation components,Applied Thermal Engineering.

8-شهرام خلیل آریا, 2015, Implementation of ANN on CCHP system to predict trigeneration performance with consideration of various operative factors,Energy Conversion and Management.

9-شهرام خلیل آریا, 2015, Energy and exergoeconomic analysis of the gas compression station: A case study,Mechanics and Industry.

10-جواد محمدحسنی-عبدالرحمن دادوند-شهرام خلیل آریا-مقصود سلیمانپور, 2015, Prediction and reduction of diesel engine emissions using a combined ANN–ACO method,Applied Soft Computing.

11-شهرام خلیل آریا, 2015, Thermodynamic evaluation of gas compression station from the point of energy and exergy view with an approach to reduce energy consumptions and emissions: A case study,Mechanics and Industry.

12-شهرام خلیل آریا, 2015, A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System,International Journal of Engineering.

13-شهرام خلیل آریا, 2015, Adaptive neuro-fuzzy system (ANFIS) based appraisal of accumulated heat from hydrogen-fueled engine,International Journal of Hydrogen Energy.

14-شهرام خلیل آریا, 2015, Exergy analysis of combustion in VGT-modified diesel engine with detailed chemical kinetics mechanism,Energy.

15-شهرام خلیل آریا, 2015, The Effect of Exhaust Gas Recirculation on Performance and Emissions of a SI Engine Fuelled with Ethanol-gasoline Blends,International Journal of Engineering.

16-شهرام خلیل آریا, 2015, Three-dimensional energetic and exergetic analysis of the injection orientation of DI diesel engine under different engine speeds,Energy Science and Engineering.

17-شهرام خلیل آریا, 2014, Hydrogen and Ethanol as potantial alternative fuels compared to gasoline under improved exhaust gas recirculation,IJE.

18-شهرام خلیل آریا, 2014, Numerical energetic and exergetic analysis of CI diesel engine performance for different fuelsof hydrogen, dimethylether, anddiesel under variousengine speeds,International journal of hydrogen energy.

19-شهرام خلیل آریا, 2014, A numerical investigation on the influence of EGR in a supercharged SI engine fueled with gasoline and alternative fuels,Energy Conversion and Management.

20-هادی تقوی فر، شهرام خلیل آریا، صمد جعفرمدار, 2014, Engine structure modifications effect on the flow behavior, combustion, and performance characteristics of DI diesel engine,Energy conversion and management.

21-شهرام خلیل آریا, 2013, Numerical and Experimental investigations of EGRdistribution in a DI turbocharged diesel engine,Transactions of the Canadian Societyfor Mechanical Engineering.

22-شهرام خلیل آریا, 2013, extended semi-analytical model for the prediction of flow and concentration fields in a tangentially-fired furnace,thermal Science.

23-شهرام خلیل آریا, 2013, computational fluid dynamics simulation of the combustion process, emission formation and the flow field in an in-direct injection diesel engine,thermal science.

24-شهرام خلیل آریا, 2013, Energy and Exergy analysis of homogeneous charge compression ignition engine,Thermal science.

25-شهرام خلیل آریا, 2013, ٍExergy and exergoeconomic analysis and optimisation of diesel engine based combined heat and power(CHP) system using genetic algorithm,Int.J.Exergy.

26-شهرام خلیل آریا, 2013, Tube bundle replacement for segmental and helical shell and tube heat exchanger: Experimental test and economic analysis,Applied Thermal Engineering.

27-شهرام خلیل آریا, 2012, nemerical investigation of the effect of injection timing under various equivalence eatios on energy and exergy terms in a direct injection si hydrogen fueled engine,hydrogen energy.

28-شهرام خلیل آریا, 2012, Prediction of NOx Emissions from a direct injection diesel engine using artificial neural network,2012Modelling and simulation in engineering.

29-., 2011, A Numerical Investigation of Solidification in Horizontal Concentric Annuli Filled with Nano-Enhanced Phase Change Material (NepCM),World Applied Sciences Journal(لیست نامعتبر).

30-., 2011, Effect of Injection Characteristics on Emissions and Combustion of a Gasoline Fuelled Partially-premixed compression ignition engine,International journal of automotive engineering.

31-شهرام خلیل آریا, 2011, Numerical Investigation of Influence of Dilution in Air and Fuel Sides on MILD combustion Burner,Australian Journal of Basic and applied Sciences.

32-شهرام خلیل آریا, 2011, Numerical Investigation on spray characteristics and combustion process in a DI Heavy Duty Diesel Engine at LTC Condition,Australian Journal of basic and applied Sciences.

33-شهرام خلیل آریا, 2011, Numerical Investigation on the effect of injection timing on combustion and emissions in a di Diesel engine at low temperature combustion conditions,International Journal of Engineering.

34-شهرام خلیل آریا, 2011, The Influence of Cavitation Phenomenon in a Diesel Injector on the spray Characteristics and Combustion process of a Di Diesel Engine,Australian Journal of basic and applied Sciences.

35-شهرام خلیل آریا, 2011, Decreasing the emissions of a partially premixed Gasoline fueled compression ignition engine by means of injection characteristics and exhaust gas recirculation,Thermal Science.

36-شهرام خلیل آریا, 2011, Incorporation of Exhaust gas recirculation and split injection for reduction of No and soot Emissions in direct injection diesel engines,Thermal Science.

37-شهرام خلیل آریا, 2011, Influence of Initial Charge Conditions on engine performance and emission of a DISI hydrogen-fueled engine under various injection timings,Turkish Journal Engineering.

38-شهرام خلیل آریا, 2011, The effect of the initial charge temperature under various injection timings on the second law terma in a direct injection SI hydrogen engine,Hydrogen energy.

39- 2011, The Effect of the initial Charge temperature under various injection timings on the second Law terms in a direct injection SI Hydrogen engine,International Journal of Hydrogen Energy.

40- 2010, Determination of Flow Pattern and Its Effect on NOx Emission in a Tangentially Fired Single Chamber Square Furnace,Thermal Science.

41- 2010, Developing of a new Comprehensive spark ignition engines code for heat loss analysis within ombustion chanber,Thermal Scince.

42- 2008, On the Modeling of a MEMS Based Capacitive Wall Shear Stress Sensor,Measurement.

43- 2003, A Fully Analytical Movment of Heat Release in Diesel Engines,Journal of Automobile Engineering, Part D, I Mech E.

44- 2001, Thermo - and Fluid - Dynamic Processes in Diesel Engines,Springes.

45-شهرام خلیل آریا, 1391, energetic and exergetic analysis of internal combustion engine cogeneration system,91مجله علمی پژوهشی انرژی.
Conference Papers/Abstracts/Posters (30)

1- 2014, A comparative study of performance and emissions of a SI engine running on alternative fuels,the 8th International Conference on Internal Combustion Engines and Oil, تهران,ایران.

2- 2004, A Mathematical Model for Computing an Impingin Spray Jet Under Quiescent conditions,IMEC 2004.

3- 2006, A Mathematical Model of an Impinging Spray Deflected Due to the Swirling Air,International Conference on Thermal Engineering Daka-Bangladesh.

4- 2010, A Modified Numerical method for Calculations of film Geometry of Elasto-Hydrodynamic line Contacts,2010 International Conference on Mechanical and electrical Technology, Singapore,Singapore.

5- 2011, A New burner Layout for the Enhancement of Mixturr Formation in Furnaces,نوزدهمین همایش سالانه مهندسی مکانیک, بیرجند,ایران.

6- 2010, A numerical model to calculate Elastohydrodynamic(EHL) Properties in Involute Spur Gears,2010 International Conference on Mechanical and electrical Technology, Singapore,Singapore.

7- 2000, A Zero Dimensional Simulation Model for HSDI Diesel Engines for Predicting NOX, Spray and Swirl Formation,THIESEL.

8- 2010, An Optimization Aproach for design parameters in Involute spur Gears Considering transmission Error Gear size and lubrication parameters using Grey Relational analysis technique,2010 International Conference on Mechanical and electrical Technology, Singapore,Singapore.

9- 2010, An Optimization Aproach for Design Parameters in Involute Spur Gears Considering Transmission Error, Gear Size and Lubrication Parametrs Using Grey Relational Analysis Technique,International Conference on Mechanical and Electrical Technology.

10- 1383, Analysis of Combustion Chamber Wall Temperature Effect on Diesel Engine Performance,دوازدهمین کنفرانس سالانه و هشتمین کنفرانس بین المللی مهندسی مکانیک.

11- 2010, Analysis of the Hydrodynamic Torque Effects on Large Size Butterfly Valves,International Conference on Mechanical and Electrical Technology.

12- 2010, Combining Artificial neural Network and ant colony optimization for designing fuel-injection control systems to reduce nox emissions in di diesel engines,سیزدهمین کنفرانس سالانه و دومین کنفرانس بین المللی دینامیک شاره ها, شیراز,ایران.

13- 1390, Combining artificial neural network and genetic algorithm to predict and reduce fuel consumption and exhaust emissions of DI diesel engine,رویکردهای نوین در نگهداشت انرژی, تهران,ایران.

14- 1391, Comparison of flow and mixing in a gasfired furnace in tangential and opposed injection modes,بیستمین کنفرانس سالانه بین المللی مهندسی مکانیک ایران, شیراز,ایران.

15- 1389, Effect of Inlet Air Velocity on Nox Emission From a Gas - Fired Cylindrical Furnace,چهارمین همایش و نمایشگاه تخصصی مهندسی محیط زیست.

16- 1394, Energy and exergy analysis of a new hybrid loop heat pipe trigeneration system for combined production of power, heat and refrigeration from industrial exhaust gases and solar energy,5th Conference on Emerging Trends in Energy Conservation, تهران,ایران.

17- 1390, Exergoeconomic Analysis and Optimization of Internal Combustion Engine Cogeneration System Using Genetic Algorithm,رویکردهای نوین در نگهداشت انرژی, تهران,ایران.

18- 1391, exergoeconomic analysis of internal combustion engine cogeneration system,بیستمین کنفرانس بین المللی مهندسی مکانیک, شیراز,ایران.

19- 2002, Further Development of a Computational Model for HSDI Diesel Engines with High- Pressure Common Rail Fuel Injection,THIESEL2002 Conference on Thermo-and Fluid -Dynamic Processes in Diesel Engines.

20- 2006, Fuzzy Control of Diesel Engine Turbocharger for Optimizaing Intsl Air Temperature,MS2006.

21- 1389, Inverse Estimation of thermal Load on a Pipe Flow by Measuring Internal temperature profiles,اولین کنفرانس علوم حرارتی, مشهد,ایران.

22- 1389, Inverse Setimation of Thermal Load on a Pipe Flow by Measuring Internal Temperature Profiles,اولین کنفرانس علوم حرارتی ایران.

23- 1392, Investigation of the effects of Air-cell Creation and cylinder walls Insulation in a DI diesel engine,بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران, تهران,ایران.

24- 2006, Modeling of Heat Losses within Combustion Chamber of Diesel Engines,IUST International Journal of Ingineering Science.

25- 1390, Numerical Investigation of Dilution in Air and Fuel Sides on MILD Combustion,نوزدهمین همایش سالانه مهندسی مکانیک, بیرجند,تهران.

26- 2011, Numerical Investigation on Influence of Dilution in Air Fuel Sides on MILD Combustion,نوزدهمین همایش سالانه مهندسی مکانیک, بیرجند,ایران.

27- 2014, Second Law analysis of an EGR implemented SI engine running on alternative fuels,the 8th International Conference on Internal Combustion Engines and Oil, تهران,ایران.

28- 1390, Study of three burner configurations and their effect on pollutant emission characteristics of the furnace,پنجمین همایش ملی و نمایشگاه تخصصی مهندسی محیط زیست, تهران,ایران.

29- 2014, The effect of ethanol addition on performance and emissions of a SI engine running on gasoline,92The 8th International Conference on Internal Combustion Engines and Oil, تهران,ایران.

30- 2005, The Effect of Exhaust Turbocharging System in Reduction of Fuel Consumption on Prototype Ford 1.8L DI,Eighth Baku International congressEnergy, Ecology, Economy"".
Research Projects (1)

1- 1385.