• Name and Family
    • r.farrokhi
  • Degree
    • PHD
  • Academic Degree
    • Assistant Professor
  • Department
    • Department of Mechanical Biosystems
  • E-mail:
 Short Bioghraphy           
         
     Research and Education Resume
رزومه فارسی
Academic Education/Training (3)
Journal Articles (12)
Conference Papers/Abstracts/Posters (17)
Research Projects (3)
Thesis Supervised (16)
Courses Taught (7)
   
  • Name and Family
  • r.farrokhi
  • Degree
  • PHD
  • Academic Degree
  • Assistant Professor
  • Department
  • Department of Mechanical Biosystems
  • E-mail:
  • r.farrokhi@urmia.ac.ir
 
 
 
         
     Research and Education Resume

Academic Education/Training (3)

1-Doctor of Philosophy, 2009, Environmental resources at the graduate school of agriculture,Hokkaido Univeristy, Japan.

2-Master of Science, 2001, Agricultural Machinery,University of Tehran.

3-bachelor, 1996, Agricultural Machinery,Urmia University.
Journal Articles (12)

1-Hassan Poorvousooghi Gargari, Rahman Farrokhi Teimourlou, Morteza Valizadeh, 2019, Spary droplet characterization using a piezoelectric sensor through classification basec on machine learning,INMATEH Agricultural engineering, Vol. 59, No. 3 .

2-A.Zareei, R.Farrokhi Teimourlu, L.Naderloo, S.M.H.Komarizade Asl, 2017, Study and modeling of changes in volumetric efficiency of spiral conveyors at different rotational speeds and inclination angels by ANFIS and Statistical Methods,Journal of Agricultural Machinery.

3-Farhadi R., Farrokhi Teimourlou R., Abbasalizadeh M., 2016, CFD simulation of different water tank shapes on temperature distribution uniformity,INMATEH Agricultural engineering.

4-Nayeb Abdolrahmani Razkeh, Rahman Farrokhi Teimourlou, 2016, Determining the optimum moisture and making drip irrigation systems intelligent,Biosystem Engineering.

5-R. FARROKHI TEIMOURLOU , H. TAGHAVIFAR, 2015, Determination of the super elliptic of the tire and soil contact area using image processing method,Agronomice în Moldova.

6-Morteza jafarlou, Rahman Farrokhi Teimourlou, 2014, Determining of exact apple volume with image processing and neural network,Journal of Agricultural Machinery.

7-M. Askari, M.H. Komarizade, A.M. Nikbakht, N. Nobakht, R.F. Teimourlou, 2011, A novel three-point hitch dynamometer to measure the draft requirement of mounted implements,Research in Agricultural Engineering.

8-A. Arefi, A. Modarres Motlag and R. Farrokhi Teimourlou, 2010, Wheat class identification using computer vision system and artificial neural networks,International Agrophysics.

9-MohammadReza Larijani, Rahman Farrokhi Teimourlou, 2012, Precise estimation of apple volume using image processing technique and neural network,Journal of Agricultural Machinery Engineeing.

10-Arman Arefi , Asad Modarres Motlagh , Kaveh Mollazade and Rahman Farrokhi Teimourlou, 2011, Recognition and localization of ripen tomato based on machine vision,Australian Journal of crop scince.

11- 2011, A machine vision system for the real time harvesting of ripe tomato,Journal of agricultural machinery science.

12- 2010, A segmentation algorithm for the automatic recognition of tomato at harvest,Journal of Food, Agriculture and Environment.
Conference Papers/Abstracts/Posters (17)

1-Mohesn Behpour, 2020, A review of the application of UV spectroscopy in evaluating the quality of agricultural products,The second international conference and sixth national conference on organic and conventional agriculture.

2-Negar Afaghi, 2016, An overview of plc applications in mechanization of agriculture and food industry,The 10th national conference on agricultural machinery engineering and mechanization.

3-Sajjad Derafshi, 2015, Wireless sensor network technology is a solution for the development of precision agriculture,The fourth national conference on agriculture and sustainable natura resources.

4-Hassan Poorvousooghi Gargari, 2015, Application of variable rate technology in spatial specific crop management,The Fourth national conference on agriculture and sustainable natura resources.

5-Nayeb Abdolrahmani Razkeh, 21014, Measuring soil properties and determining the appropriate moisture for plant growth,The 7th regional conference on agricultural research findings.

6-Nayeb Abdolrahmani Razkeh, 2014, Evaluate the accuracy of the hygrometer sensor in showing the optimal moisture levels for optimal plant growth,The 7th regional conference on agricultural research findings.

7-Nayeb Abdolrahmani Razkeh, 2013, Calibration of a cheap, cost-effective soil moisture meter for use in drip irrigation systems,The 7th national conference on agricultural machinery engineering and mechanization.

8-Behnam sarangi, 2013, Design and manufacture of furrower and manure spreader for vine products,The 6th regional conference on agricultural research findings.

9-Ali Faraji, 2012, Classification of different cultivars of almonds by audio method and artificial neural network,The 7th national conference on agricultural machinery engineering and mechanization.

10-Ashkan Zarei, 2012, Investigation of the effect of rotational speed and different distances of spiral conveyor from studs on mechanical damage of wheat grain during horizontal transmission,The 7th national conference on agricultural machinery engineering and mechanization.

11-Morteza jafarlou, 2012, Designing a model for determining the volume of apple indentations to estimate its exact volume with the visual machine, neural network and regression model,The 7th national conference on agricultural machinery engineering and mechanization.

12-Morteza jafarlou, 2012, Determining the volume of apples using image processing and neural network,The 7th national conference on agricultural machinery engineering and mechanization.

13-MohammadReza Larijani, 2011, Investigation of environmental nitrate pollution due to nitrogen leaching from rice fields,The fFifth regional conference on agricultural research findings.

14-MohammadReza Larijani, 2011, Determination of rice nitrogen based on image processing model in field conditions,The fFifth regional conference on agricultural research findings.

15-MohammadReza Larijani, 2010, Investigation of machine vision technology in determining of nitrogen in rice plants,The first national conference on mechanization and new technologies in agriculture.

16-Rasoul Mouloudpori, 2010, Investigation of energy consumption in the corn drying process to optimize dryers,The first national conference on mechanization and new technologies in agriculture.

17-Gholamhosein Shahgoli, Yousef abbaspour Gilandeh, Rahman Farrokhi Teimourlou, 2010, Use of necessary energy to loosen the soil profile to compare the performance of tillage tools,The 6th national conference on agricultural machinery engineering and mechanization .
Research Projects (3)

1- 2018, 5 ton balanced (two axles) trailer model TRT5.

2- 2017, Kobra M19 1000 liter traction garden turbocharger sprayer.

3- 2016, Automatic and intelligent control of water use in drip irrigation systems .
Thesis Supervised (16)

1-Hassan Poorvousooghi Gargari, 2020, Providing an electronic system to study the properties of spray droplets deposition on plant surfaces, Rahman Farrokhi Teimourlou.

2-Farough Fattahi, 2019, Application of machine vision and neural network in estimating gear parameters.

3-Habib Mohammadi Naghadeh, 2018, Ergonomic study of customary tractor pedals in terms of force by the operator in Iran.

4-Rouhollah Farhadi, 2017, Water disinfection in hydroponic systems using a combined vacuum tube solar collector.

5-Sajjad ghaderi, 2017, Classification of wheat based on the percentage of impurities.

6-Naser Tarkhani, 2017, Automatic drip irrigation control based on plant canopy temperature .

7-Faraz saeidifard, 2017, Paddy transfer helis simulation and estimation of required power in comparison with experimental test results.

8-Nayeb Abdolrahmani Razkeh, 2015, Intelligent control of water use in drip irrigation systems.

9-Jafar Nemati , 2015, Design and construction of viscosity measuringdevice for oil.

10-Behnam sarangi, 2013, Design, construction and evaluate of furrower and manure spreader specified machine for vine crops.

11-Ashkan Zarei, 2012, Investigation of factors affecting the performance of spiral conveyors in wheat transfer.

12-Morteza jafarlou, 2012, Determining of apple volume with image processing .

13-Saeid Alyari, 2012, Design and Manufacturing a Robot to Measure Soil Cone Index and Produce a 3d Model of Farm Surface.

14-Rasoul MolodPouri, 2011, Effect of temperature and air velocity changes on the drying process of corn.

15-MohammadReza Larijani, 2011, Determining the Nitrogen Content in Paddy Rice Using Machine Vision .

16-Arman Arefi, 2011, A Segmentation Algorithm for the Automatic Recognition of Tomato at Harvest, Asad Modarres Motlagh Rahmanr Farrokhi Teimourlou.
Courses Taught (7)

1-Precision Farming, Doctorate.

2-Image processing, Master of Science .

3-Advanced measurement systems, Master of Science .

4-Numerical calculations , Bachelor of Science .

5-Computer programming, Bachelor of Science .

6-Measurement and control systems, Bachelor of Sceince.

7-Fundamentals of electric engineering, Bachelor of Science.