• Name and Family
    • s.jafarmadar
  • Degree
    • PHD
  • Academic Degree
    • Professor
  • Department
    • Department of Mechanical Engineering
  • E-mail:
 Short Bioghraphy           
         
     Research and Education Resume
رزومه فارسی
Journal Articles (66)
Conference Papers/Abstracts/Posters (14)
Books (1)
Research Projects (5)
   
  • Name and Family
  • s.jafarmadar
  • Degree
  • PHD
  • Academic Degree
  • Professor
  • Department
  • Department of Mechanical Engineering
  • E-mail:
  • s.jafarmadar@urmia.ac.ir
 
 
 
         
     Research and Education Resume

Journal Articles (66)

1-صمد جعفرمدار, 2016, A RANS simulation toward the effect of turbulence and cavitation on spray propagation and combustion,Theor. Comput. Fluid Dyn..

2-صمد جعفرمدار, 2016, Numerical Simulation of Flash Boiling Effect in a 3-Dimensional Chamber Using,International Journal of Engineering.

3-صمد جعفرمدار, 2015, apriasial of artificial neural network............................,clean producer.

4-صمد جعفرمدار, 2015, on the modeling of convective heat transfer coeffieceint ............................,int.journal of hydrogen genergy.

5-صمد جعفرمدار, 2015, Towards modeling of combined cooling, heating and power system with artificial neural network for exergy destruction and exergyefficiency prognostication of tri-generation components,Applied Thermal Engineering.

6-صمد جعفرمدار, 2015, Analysis of exergy and total life cycle cost forsegmental and helical baffles in a shell-and-tube heat,international journal of exergy.

7-صمد جعفرمدار, 2015, EFFECT OF AIR JET AT THE VARIOUS RATE OF FUEL INJECTION,Iranian Journal of Science and Technology-Transactions of Mechanical Engineering.

8-محمد جوادزاده- شهرام خلیل اریا صمد جعفرمدار-امیر کامور, 2015, Energy and exergoeconomic analysis of the gas compression,Mechanics and Industry.

9-صمد جعفرمدار, 2015, Experimental Investigation of Pollution and Fuel Consumption on a CI Engine Operated on Alumina Nanoparticles—Diesel Fuel with the Aid of Artificial Neural Network,Environmental Progress and Sustainable Energy.

10-صمد جعفرمدار, 2015, Experiments on air bubbles injection into a vertical shell and coiled tubeheat exchanger; exergy and NTU analysis,Energy Conversion and Management.

11-صمد جعفرمدار, 2015, Multidimensional modeling of the effect of Exhaust Gas Recirculation (EGR) on exergy terms in an HCCI engine fueled with a mixture of natural gas and diesel,energy and conversion managment.

12-صمد جعفرمدار, 2015, Numerical assessment of flow dynamics for various DI diesel enginedesigns considering swirl number and uniformity index,Energy Conversion and Management.

13-صمد جعفرمدار, 2015, Exergy analysis of air injection at various loads in a natural aspirated,Fuel.

14-صمد جعفرمدار, 2015, EXPERIMENTS ON NEW ARRANGEMENTS OF CONVEXAND CONCAVE CORRUGATED TUBES THROUGH ADOUBLE-PIPE HEAT EXCHANGER,Experimental Heat Transfer.

15-صمد جعفرمدار, 2015, Numerical investigation of the effect split injection scheme on exergy terms in an IDI (indirect injection) diesel engine by three dimensional modeling,Energy.

16-صمد جعفرمدار, 2015, POLLUTANTS EMISSION AND DISPERSION FROM ELEVATEDGAS FLARE: C.S. OF AGHAJARY,INTERNATIONAL JOURNAL OF ENVIRONMENT AND POLLUTION.

17-صمد جعفرمدار, 2015, Adaptive neuro-fuzzy system (ANFIS) based appraisal of accumulated heat from hydrogenfueled engine,Int J Hydrog Energy.

18-صمد جعفرمدار, 2015, effects of magnitic nonparticles.................................,journal of magnitesm and and manitic materials.

19-صمد جعفرمدار, 2015, Experimental studies on heat transfer and pressure dropcharacteristics for new arrangements of corrugated tubes in a doublepipe heat exchanger,International Journal of Thermal Sciences.

20-صمد جعفرمدار, 2015, EXPERIMENTAL STUDY OF THE EFFECTS OF AIR-INJECTION, INJECTION TIMING AND COOLED EGR ON THE COMBUSTION, EMISSIONS AND PERFORMANCE OF A NATURE ASPIRATED DIRECT INJECTION DIESEL ENGINE,مجله مهندسی مکاتیک دانشگاه شیراز.

21-صمد جعفرمدار, 2015, The effect of flow, thermodynamic and geometrical characteristics on,Energy.

22-صمد جعفرمدار, 2015, A comparative analysis of two neural network predictions A comparative analysis of two neural network predictions A comparative analysis of two neural network predictions A comparative analysis of two neural network predictions A comparative analysis,International Journal of Automotive Engineering.

23-صمد جعفرمدار, 2015, Exergy analysis of natural gas/diesel combustion in homogenous charge compression ignition engines (HCCI) using multi-dimensional model,Int. J. Exergy.

24-صمد جعفرمدار, 2015, Multi-dimensional modeling of the effect of the diesel fuel quantity on the exergy terms in an engine fuelled with a mixture of diesel and natural gas,Proc IMechE Part D: J Automobile Engineering _ IMechE 2015.

25-صمد جعفرمدار, 2014, analytical and numerical simalution investigation in effect of radiation and prosity in a non orthogonal .....,Indian Journal of Pure and Applied Mathematics.

26-صمد جعفرمدار, 2014, Heat generation/absorption on MHD stagnation flow of nanofluid towards a porous stretching sheet with prescribed surface heat flux,Journal of Molecular Liquids.

27-صمد جعفرمدار, 2014, A Unified Model Considering Effects of Droplet Break-Up and Air Entrainment at the Initial Stage of Fuel Spray Penetration,Mathematical Problems in Engineering.

28-صمد جعفرمدار, 2014, Reduction of emissions and fuel consumption in a compression ignition engine using nanoparticles,International Journal of Environmental Science and Technology.

29-صمد جعفرمدار نادر جوانی, 2014, Exergy analysis of natural gas/DME combustion inhomogeneous charge compression ignition engines(HCCI) using zero-dimensional model with detailedchemical kinetics mechanism,Int. J. Exergy.

30-صمد جعفرمدار, 2014, Heat transfer enhancement due to air bubble injection into a horizontal double pipe heat exchanger,International Journal of Automotive Engineering.

31-Samad JAFARMADAR and Jalilpour BEHROUZ, 2014, THREE DIMENSIONAL MODELING OF COMBUSTION PROCESSAND EMISSION FORMATION IN A LOW HEAT REJECTIONINDIRECT INJECTION DIESEL ENGINE,THERMAL SCIENCE.

32-صمد جعفرمدار, 2014, Diesel engine spray characteristics prediction with hybridized artificial neural network optimized by genetic algorithm,Energy.

33-صمد جعفرمدار, 2014, Engine structure modifications effect on the flow behavior, combustion ,and performance characteristics of DI diesel engine,Energy Conversion and Management.

34-B. Jalilpour , S. Jafarmadar , D. D. Ganji, 2014, MHD stagnation flow towards a porous stretching sheet with suction or injection and prescribed surface heat flux,J Braz. Soc. Mech. Sci. Eng..

35-صمد جعفرمدار, 2014, Tube bundle replacement for segmental and helical shell and tubeheat exchangers: Experimental test and economic analysis,Applied Thermal Engineering.

36-صمد جعفرمدار, 2014, Exergy analysis of hydrogen/diesel combustion in a dual fuel engine using three-dimensional model,i n t e r n a t i o n a l journal o f hydrogen energy.

37-صمد جعفرمدار, 2014, Multidimensional modeling of the effect of EGR (exhaust gas recirculation) mass fraction on exergy terms in an indirect injectiondiesel engine,Energy.

38-صمد جعفرمدار, 2014, Multidimensional modelling of the effect of engine load on various exergy terms in an indirect injectiondiesel engine,Int. J. Exergy.

39-محبی-جعفرمدار-پاشائی -شیرنژاد, 2013, EXPERIMENTAL STUDYING THE EFFECT OF EGR DISTRIBUTION ON THE COMBUSTION, EMISSIONS AND PERFOREMANCE IN A TURBOCHARGED DI DIESEL ENGINE,International Journal of Engineering.

40-صمد جعفرمدار, 2013, Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under,International Journal of Engineering.

41-Reza Rahimi, S. Jafarmadar, Sh. Khalilarya, A. Mohebbi, 2013, NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF EGR DISTRIBUTION IN A DI TURBOCHARGED DIESEL ENGINE,Transactions of the Canadian Society for Mechanical Engineering.

42-S. Jafarmadar1 , M. Khanbabazadeh, 2013, A Full-Cycle 3 Dimensional Numerical Simulation Of a Direct Injection Diesel Engine,International Journal of Automotive Engineering.

43-صمد جعفرمدار, 2013, Experimental Investigation of the Effects of Air Injection and Injection Timingin a,International Journal of Engineering2013.

44-صمد جعفرمدار, 2013, Experimental Study of the Effect of Castor Oil Biodiesel Fuel on Performance and,International Journal of Engineering2013.

45-صمد جعفرمدار, 2013, IMPROVEMENT OF EMISSIONS AND PERFORMANCE BYUSING OF AIR JET, EXHAUST GAS RE-CIRCULATION ANDINSULATION METHODS IN A DIRECT INJECTION DIESEL ENGINE,THERMAL SCIENCE:0نام دانشگاه ارومیه نیست).

46-صمد جعفرمدار, 2013, MULTI-DIMENSIONAL MODELING OF THE EFFECTS OF SPILT INJECTION SCHEME ON PERFORMANCE AND EMISSIONS OF IDI DIESEL ENGINES,International Journal of Engineering.

47-صمد جعفرمدار, 2013, Numerical investigation of the effects of dwell time duration in a two-stage injection scheme on exergy terms in an IDI diesel engine by three-dimensional modeling,energy science and engineering.

48-صمد جعفرمدار, 2013, A SEMI-ANALYTICAL MODEL FOR THE PREDICTION OF THE BEHAVIOR OF TURBULENT COAXIAL GASEOUS JETS,THERMAL SCIENCE.

49-صمد جعفرمدار, 2013, An Optimized Process for Biodiesel Production from High FFA Spent Bleaching,International Journal of Engineering2013.

50-E. Alizadeh Haghighi , S. Jafarmadar , H. Taghavifar, 2013, Application of ANN-ICA Hybrid Algorithm toward Prediction of Engine Power and Exhaust Emissions,International Journal of Automotive Engineering2013.

51-S. Jafarmadar, R. Tasoujiazar and B. Jalilpour, 2013, Exergy analysis in a low heat rejection IDI diesel engine by three dimensional modeling,INTERNATIONAL JOURNAL OF ENERGY RESEARCH2013.

52-صمد جعفرمدار, 2013, On a MEMS based dynamic remote temperature sensor using,Measurement.

53-عباسعلی زاده -صمد جعفرمدار-شیرانی, 2013, The Effects of Pressure Difference in Nozzle’s two Phase Flow on the Quality of,International Journal of Engineering.

54-صمد جعفرمدار, 2013, THE NUMERICAL EXERGY ANALYSIS OF H2/AIR COMBUSTION WITH DETAILED CHEMICAL KINETIC SIMULATION MODEL,International Journal of Engineering.

55-صمد جعفرمدار, 2013, Three-dimensional modeling and exergy analysis in Combustion Chambers,Fuel.

56-صمد جعفرمدار, 2011, combustion improvment for reducing exhaust emission in a DI diesel engine,international journal of automtive engine.

57-صمد جعفرمدار, 2011, Performance Evaluation and Emissions improving ofTurbocharged DI Diesel Engine with Exhaust Gas Recirculation (EGR),international journal of automotive engine.

58-صمد جعفرمدار, 2010, Influence of initial charge conditions on engine performance andemission of a DISI hydrogen-fueled engine under various injectiontimings,Turkish J. Eng. Env. Sci..

59- 2009, Modeling the Effect of Spray/Wall Impingement on Combustion Process and Emission of DI Diesel Engine,Thermal Science.

60- 2009, Multi-Dimensional Modeling of the Effects of Split Injection Scheme on Combustion and Emissions of Direct-Injection Diesel Engines at Full Load State,IJE Transactions A: Basics.

61- 2009, The Influence of Injection System Characteristics on the First and Second Low Term in High Speed DI Diesel Engines with Swirl Combustion Chamber,Int. J. Exergy.

62- 2009, Three-Dimensional Modeling of Combustion Process and Soot and Nox formation In a Direct-injection Diesel Engine,The Journal of Engine Research.

63- 2008, A Computational Study of the Effects of Combustion Chamber Geometries on Combustion Process and Emission in a DI Ediesel Engine,Journal Fuel and Combustion.

64-سجاد امامی-صمد جعفرمدار, 1392, Multidimensional modeling of the effect of fuel injection pressure on temperature distributionincylinder of aturbochargedDIdieselengine,Propulsion andPowerResearch2013.

65-صمد جعفرمدار, 1391, Combustion Modeling forModern Direct Injection Diesel Engines,Iran. J. Chem. Chem. Eng.2012.

66-صمد جعفرمدار, 1390, NUMERICAL STUDIES OF SPRAY BREAKUP IN A GASOLINE DRIECT INJECTION ENGINE,THERMAL SCIENCE.
Conference Papers/Abstracts/Posters (14)

1- 1391, Comparison of Flow and Mixing in a Gas-fired Furnace in Tangential and Opposed Injection,20th Annual International Conference on Mechanical Engineering-ISME2012, Shiraz,Iran.

2- 1393, Experimental study on the performance and emission characteristics of water fuel emulsion in IC engine,کنفرانس بین امللی مهندسی مکانیک, اهواز,ایران.

3- 1392, Improving the power, reduction of environmental pollutants and fuel consumption by using nanoparticles in diesel fuel,سومین کنفرانس نگه داشتهای نوین انرژی92, تهران,ایران.

4- 1393, Increased dielectric and cooling properties of mineral oil based magnetic nanofluids for use in power systems,5th International Congress on Nanoscience and Nanotechnology, تهران,ایران.

5- 2008, Modeling the effect of EGR on Combustion and Pollution of Direct Injection Diesel Engines with Flow Field Model,5th International Chemical Engineering Congress & Exhabition.

6- 2009, Numerical Inveatigation of the Effect of Fuel Preheating on Combustion Process and Emission in a Direct Injection Diesel Engine,Proceeding of the Sixth International Conference on Internal Combustion Engines.

7- 2010, Numerical Investigation Of the Effect of Nozzle Orifice Geometry on the Spray Characteristics and Combustion Process of a DI Diesel Engine,13th Annual& 2nd International Dynamics Conference.

8- 1392, Performance Evaluation of Shell and Tube Heat Exchanger by Tube Bundle Replacement with Segmental and Helical Baffles,21st Annual International Conference on Mechanical Engineering-ISME2013, تهران,ایران.

9- 1392, Power optimization of a marine diesel engine using different turbocharger configuration,هشتمین کنفرانس بین المللی موتور های احتراق داخلی92, تهران,ایران.

10- 1392, Prediction of performance and emissions of diesel engine fueled withvarious biodiesel using by neural networks,8-th International Conference on Internal Combustion Engines, تهران,ایران.

11- 2006, Simulation of Combustion Process in Dual Fuel Engines at Part Loads Using Detailed Chemical Kinetics Mechanism, 14 th Annual (International) Conference of Mechanical Engineering ISME2006.

12- 1390, The effect of the initial charge temperature on the second law terms under the variousinjection timings in direct injection SI hydrogen engine,19th Annual Conference on Mechanical Engineering-ISME2011, Birjand,Iran.

13- 1386, Three-Dimensional Modeling of Combustion Process and Soot and Nox formation In a Direct-injection Diesel Engine,پنجمین همایش موتورهای برونسوز.

14- 1386, Three-Dimensional Modeling of Effects of Fuel Injection Mode on Soot and Nox Emissions Formation in a Direct-Injection Diesel Engine,پنجمین همایش موتورهای برونسوز.
Books (1)

1-صمد جعفرمدار, 2013, Diesel Engine - Combustion, Emissions and Condition, ناشر معتبر خارجی,تالیف.
Research Projects (5)

1- 1394, Experimental Investigation on the Effect of fuel nanoadditives on performance and emission of internal combustion engines.

2- 1392, Experimental Studying of the Effect of Exhaust Gas Recirculation bio diesel fuel adding on Performance and Emissions of a diesel engines.

3- 1394, investigation of combustion process in micro motor by using of chemical kinetics models.

4- 1391, Investigation of the cyclic variation in dual fuel engines (diesel-gas).

5- 1388, Numerical studying effects of piston shape geometry on the combustion process and emission in the direct injection diesel engines.