• Name and Family
    • n.pormahmod
  • Degree
    • PHD
  • Academic Degree
    • Professor
  • Department
    • Department of Mechanical Engineering
  • E-mail:
    • n.pormahmod@urmia.ac.ir
 Short Bioghraphy           
         
     Research and Education Resume
رزومه فارسی
Journal Articles (53)
Conference Papers/Abstracts/Posters (17)
Research Projects (4)
   
  • Name and Family
  • n.pormahmod
  • Degree
  • PHD
  • Academic Degree
  • Professor
  • Department
  • Department of Mechanical Engineering
  • E-mail:
  • n.pormahmod@urmia.ac.ir
 
 
 
         
     Research and Education Resume

Journal Articles (53)

1-نادر پورمحمود, "Laminar MHD flow and heat transfer of power-law fluids in square", International Journal of Thermal Sciences, 2016.

2-Nader POURMAHMOUD1,Ashkan GHAFOURI1,b, Iraj MIRZAEE1,, "NUMERICAL COMPARISON OF VISCOSITY MODELS ON MIXED CONVECTION IN DOUBLE LID-DRIVEN CAVITY UTILIZED CUO-WATER NANOFLUID", Thermal Science, 2016.

3-Nader Pourmahmoud , Mohammad Abbaszadeh*, Masoud Rashidzadeh, "NUMERICAL SIMULATION OF EFFECT OF SHELL HEAT TRANSFER ON THE VORTEX TUBE PERFORMANCE", INT. J. HEAT and TECH, 2016.

4-نادر پورمحمود, "THE EFFECTS OF LONGITUDINAL RIBS ON ENTROPY GENERATION FOR LAMINAR FORCED CONVECTION IN A MICROCHANNEL", Thermal Scince, 2016.

5-نادر پورمحمود, "Thermal Performance Analysis of Nanofluid Thermal Conductivity", JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2016.

6-نادر پورمحمود, "A parametric study on the performance of a Ranque-Hilsch", Mechanics and Industry, 2015.

7-Ashkan Torkavannejad, Hamidreza Sadeghifar, Nader Pourmahmoud, Farzin Ramin, "Novel architectures of polymer electrolyte", i n t e r n a t i o n a l journal of hydrogen energy, 2015.

8-نادر پورمحمود, "CFD investigation of inlet", International Journal for Computer-, 2015.

9-Nader Pourmahmoud , Reza Esmaily°, Amir Hassanzadeh, "CFD INVESTIGATION OF VORTEX TUBE LENGTH EFFECT AS A DESIGNING CRITERION", INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2015.

10-Nader POURMAHMOUD, Ashkan GHAFOURI , and Iraj MIRZAEE, "NUMERICAL STUDY OF MIXED CONVECTION HEAT TRANSFER", THERMAL SCIENCE, 2015.

11-نادر پورمحمود, "The effects of longitudinal fins on thermal", J Mechanical Engineering Science, 2015.

12-NADER POURMAHMOUD, MASOUD RAHIMI SEYYED EHSAN RAFIEE, AMIR HASSANZADEH, "A NUMERICAL SIMULATION OF THE EFFECT OF INLET GAS TEMPERATURE ON THE ENERGY SEPARATIONIN A VORTEX TUBE", Journal of Engineering Science and Technology, 2014.

13-نادر پورمحمود, "A parametric study on the performance of a Ranque-Hilsch Vortex Tube Using a CFD-Based Approach", Mechanics and Industry, 2014.

14-نادر پورمحمود, "Computational Fluid Dynamics Analysis of the Influence of Injection Nozzle Lateral Outflow on the Performance of Ranque-Hilsch Vortex Tube", Thermal Science, 2014.

15-نادر پورمحمود, "Design of water distribution networks using accelerated momentum", Journal of Experimental and Theoretical Artificial Intelligence, 2014.

16-نادر پورمحمود, "Investigation of Thermal Behavior and Fluid Motion in Direct Current Magnetohydrodynamics Pumps", Thermal Science, 2014.

17-نادر پورمحمود, "Numerical Analysis of Two-dimensional Isentropic Compressible Flowinside a Channel With Circular Arc and Rectangular Bump", International Journal of Mathematical Analysis and Applications, 2014.

18-نادر پورمحمود, "Three Dimensional Computational Fluid Dynamics Analysis of a Proton Exchange Membrane Fuel Cell", Journal of Renewable Energy and Environment, 2014.

19-نادر پورمحمود, "The simulation of novel annular shape on the performance in proton exchange membrane fuel cell", Iranian Journal of Hydrogen and Fuel Cell, 2014, 3,3.

20-نادر پورمحمود, "A New Algorithm for the Simulation of a Rarefied Gas Flow in a Rotating Cylinder Using the Consistent Boltzmann Algorithm", Journal of the Brazilian Society Mechanical Science Engineering, 2014.

21-نادر پورمحمود, "Numerical Analysis of Mass Transport and Water Management", International Journal of Fluid Mechanics Research, 2014.

22-Sajad Rezazadeh, Nima Ahmadi, Nader Pourmahmoud, "Numerical Analysis of mass transport and water management in Proton Exchange Membrane Fuel Cell", International journal of fluid mechanic research, 2014.

23-نادر پورمحمود, "Numerical Investigation of Operating Pressure Effects on The Performance of a Vortex Tube", Thermal Science, 2014.

24-نادر پورمحمود, "Numerical Simulation of Secondary Vortex Chamber Effect on the Cooling capacity Enhancement of Vortex Tube", Heat and Mass Transfer, 2014.

25-N. Pourmahmoud, A. Jahangiramini, A. Izadi, "Optimization of Low Pressure Vortex Tube via Different Axial Angles of Injection Nozzles", IJE TRANSACTIONS A: Basics, 2014.

26-نادر پورمحمود, "The Effect of Longitudinal Fins on Thermal Performance of a Curved Micro channel: A Numerical Study", Journal of Mechanical Engineering Science, 2014.

27-N. Pourmahmoud, S.E. Rafiee, M. Rahimi, A. Hassanzade, "Numerical energy separation analysis on the commercial Ranque-Hilsch vortex tube on basis of application of di", Scientia Iranica Transactions B: Mechanical Engineering, 2013.

28-Sajad Rezazadeh, Nima Ahmadi, Nader Pourmahmoud, Iraj Mirzaee, "TWO DIMENSIOAL NUMERICAL ANALYSIS OF OPERATING AND GEOMETRICAL PAPRAMETERS EFFECT ON THE FUEL CELL PERFORMANCE", INTERNATIONAL JOURNAL OF HEAT and TECHNOLOGY, 2013.

29-Omid Karimi Sadaghiyani, Nader pourmahmoud, Iraj Mirzaee, "Numerical Simulation CoupledWith MCRT Method to Studythe Effect of Plug Diameter", Journal of Solar Energy Engineering, 2013.

30-Seyed Ehsan Rafiee1 , Masoud Rahimi1, Nader Pourmahmoud2, "Three-dimensional numerical investigation on a commercial vortex tube based on an", 2013INTERNATIONAL JOURNAL OF HEAT and TECHNOLOGY, 2013.

31-Seyed Eshan Rafiee , Masoud Rahimi, Nader Pourmahmoud, "THREE-DIMENSIONAL NUMERICAL INVESTIGATION ON A COMMERCIAL VORTEX TUBE BASED ON AN EXPERIMENTAL MODEL - PART I: OPTIMIZATION OF THE WORKING TUBE RADIUS", International Journal of Heat and Technology(چاپ نشده), 2013.

32-نادر پورمحمودحصار, "Numerical Simulation of Effects of Non-Ionized Fluid Injection and Suction on the MHD Flow in a Circular Channel", Iternational Journal of Engineering, 2012, 25,1.

33-Nader Pourmahmoud, Sajad Rezazadeh, Iraj Mirzaee and Sonita Motaleb Faed, "A computational study of a three-dimensional proton exchange membrane fuel cell (PEMFC) with conventional and deflected membrane electrode assembly", (به نام دانشگاه صنعتی)Journal of Mechanical Science and Technology, 2012.

34-نادر پورمحمودحصار, "CFD Analysis of Hellical Nozzles Effect on the Energy Separation in A Vortex Tube", Journal of Thermal Science, 2012, 1,1.

35-نادر پورمحمودحصار, "Thermal behavior and entropy generation rate analysis of a viscous flow in", Journal of Mechanical Science and Technology, 2012, 26,6.

36-N. Ahmadi, S. Rezazadeh, I. Mirzaee and N. Pourmahmoud, "Three-dimensional computational fluid dynamic analysis of the conventional PEM fuel cell and investigation of prominent gas diffusion layers effect", (نام دانشگاه صنعتی)Journal of Mechanical Science and Technology, 2012.

37-N. AHMADI , N. POURMAHMOUD, I. MIRZAEE AND S. REZAZADEH, "THREE-DIMENSIONAL COMPUTATIONAL FLUID DYNAMIC STUDY ON", 2012IJST, Transactions of Mechanical Engineering, 2012.

38-Nader Pourmahmoud, Amir Hassanzadeh, Seyyed Ehsan Rafie, Masoud Rahimi, "Three-Dimensional Numerical Investigation of Effect of Convergent Nozzles on the Energy Separation in a Vortex Tube", International Journal of Heat and Technology, 2012.

39-Nader Pourmahmod, Salar Imanmehr, "A Parametric Study of Bipolar Plate Structural Parameters on the Performance of Proton Exchange Membrane Fuel Cell", Journal of Fuel Cell Science and Technology, 2012.

40-نادر پورمحمودحصار, "Numerical analysis of the effect of helical nozzles gap on the", i n t e r n a t i onal j o u r n a l o f r e f r i g e r a t i o n, 2012, 35,35.

41-نادر پورمحمودحصار, "A Numerical Comparison of Single-Phase Force Convection Heat Transfer Between Round Tube and Round Microchannel Heat Exchangers", Australian Journal of Basic and Applied Sciences, 2011.

42-نادر پورمحمودحصار, "Computational Fluid Dynamics Modeling of the Turbulent Flow in the Expansion Valves", Australian Journal of Basic and Applied Sciences, 2011, 5,9.

43-نادر پورمحمودحصار, "Investigation of MHD Flow of Compressible Fluid in a Channel with Porous Walls", Australian Journal of Basic and Applied Science, 2011.

44-نادر پورمحمودحصار, "Three Dimensional computational Fluid Dynamic Study of the Effect of Different channel and Shoulder geometry on Cell Performance", Australian Journal of Basic and Applied Sciences, 2011, 5,12.

45-نادر پورمحمودحصار, "Three Dimensional Numerical Analysis of Proton Excgange Memberance Fuel Cell", Journal of Mechanical Science and Technology, 2011, 25,10.

46-نادر پورمحمودحصار, "CFD Simulation of Length to Diameter Ratio Effects on The Energy Separation in a Vortex Tube", Journal of Thermal Science, 2011, 15,3.

47- "The Effect of L/D Ratio on The Temperature Separation in The Counter Flow Vortex Tube", International Journal of Research and Reviews in Applied Sciences, 2011, 1,6.

48-نادر پورمحمودحصار, "The Effect of Cross-Wins on an Indirect Dry Cooling Tower With or Without Windbreaks", Proceeding of the Institution of Mechanical Engineering, Part A: Journal of Power and Energy, 2011, 225,225.

49- "Analytical and Numerical Analysis of MHD Boundary Layer Flow of an Upper Convected Maxwellfluid", International Journal of Engineering Science and Technology, 2010, 1,2.

50- "The Effects of Magnetic Flux Density and Applied Current on Temperature Velocity and Entropy Generation Distribution in MHD Pumps", The Acta Mechanics, 2009.

51- "Simylation of Body Force Field Effects on Airfoil Seperation Control and Optimization of Plasma Actuator", J. Phys. D: Appl. Phys, 2008.

52- "Numerical Investigation of the Thermal Seperation in a Vortex TUbe", Proceeding of World Academy of Science,Engineering and Tecnology, 2008.

53- "Rarefiled Gas Flow Modeling Inside Rotating Circular Cylender", American Journal of Engineering and Applied Sciences, 2008.
Conference Papers/Abstracts/Posters (17)

1- "A Numerical Analysis of Two-Dimensional Proton Exchange Membrane Fuel Cell", 2th International Electric Energy Consumption Optimization, 2011, اهواز,ایران.

2- "A Numerical Study of a Rarefied Gas in Couette Flow", 15th Annual (International) Conference on Mechanical Engineering, 2007.

3- "A Numerical Study of a Three- Dimensional (PEM) Fuel Cell", 13th Annual& 2nd International Conference of Fluid Dynamics, 1389.

4- "A Numerical Study of Single- Phase Forced Convective Heat Transfer with Flow Friction in Microchannels", 13th Annual& 2nd International Conference of Fluid Dynamics, 2010.

5- "CFD Analysis of Temperature Field on Incompressible Flow inside 2D Lid-Driven Square Cavity and Comparison Solution in Different Regimes", International Conference on Mechanical Eanginering and Advanced Technology 2012(دانشگاه آزاد), 2012, اصفهان,ایران.

6- "Effect of Nanoparticle Diameter on Thermal", 17th Internationa Conference on Advanced in Fluid Mechanics, 1394, Istanbul,Turkey.

7- "Numerical Inverstigation of Shocks in Compressible Turbulent Mixing Layers with Large Eddy Simulation", 13th Annual& 2nd International Conference of Fluid Dynamics, 1389.

8- "Numerical Investigation of Pressure Effect on the Performance of Expansion Valves", 17th International Conference on Mechanical Engineering, 2009.

9- "NUMERICAL INVESTIGATION TOWARDS A VORTEX TUBE WITH STRAIGHT AND HELICAL NOZZLES", 14th Conference On Fluid Dynamics, fd2012, 1391, Tehran,Iran.

10- "Numerical Simulation of Body Force Field Effects on Separation control over Airfoils", 16th Annual Conference on Mechanical Engineering, 2008.

11- "Numerical Simulation of Effects of Non- Ionized Mass Injection on the Mhd Flow in a Circular Channel", 13th Annual& 2nd International Conference of Fluid Dynamics, 1389.

12- "Numerical Simulation of the Turbulent Flow in the Expansion Valves", National Conference of Mechanical Engineering, 2008.

13- "Numerical Study of Flow Variation of Pressure and Temperture in a Vortex Tube", 17th International Conference on Mechanical Engineering, 2009.

14- "Simuiation of Body Force Field Effects on Airfoil Separation Control and Optimizations of Plasma Actuator", یازدهمین کنفرانس دینامیک شاره ها, 1387.

15- "Study of Electrostatic Model for Numerical Simulation of Aerodinamic Plasma Actuator Mechanism", 16th Annual International Conference on Mechanical Engineering, 2008.

16- "Study on the Ability of Electrostatic Modeling for Numerical simulation of Plasma Actuators", 16th Annual Conference on Mechanical Engineering, 2008.

17- "THE FLOW PATTERN STUDY OF A CENTRIFUGAL PUMP USING", International Conference on Computational Fluid Dynamics in Research and Industry, 1394, Kuala Lumpur,Kuala Lumpur.
Research Projects (4)

1- "Numerical Simulation of aturbulent Compressible Flow Around Symmetric Oscillating Airfoils", 1385.

2- 1392.

3- 1386.

4- 1385.