• Name and Family
    • t.azdast
  • Degree
    • PHD
  • Academic Degree
    • Assosiate Professor
  • Department
    • Department of Mechanical Engineering
  • E-mail:
    • t.azdast@urmia.ac.ir
 Short Bioghraphy           
         
     Research and Education Resume
رزومه فارسی
Journal Articles (11)
Conference Papers/Abstracts/Posters (30)
Research Projects (2)
   
  • Name and Family
  • t.azdast
  • Degree
  • PHD
  • Academic Degree
  • Assosiate Professor
  • Department
  • Department of Mechanical Engineering
  • E-mail:
  • t.azdast@urmia.ac.ir
 
 
 
         
     Research and Education Resume

Journal Articles (11)

1-ایوب کریم زاد- طاهر ازدست- محمد رضا شبگرد- امیر نویدفر- سجاد ممقانی, "Effect of carbon nanotubes on laser cutting of multi-walled carbon nanotubes/polymethylmethacrylatena nocomposites", Optics and Laser Technology, 2015.

2-طاهر ازدست, "effect of flow forming on mechanical properties of high density polyethylene pipes", journal of manufacturing processes, 2015.

3-طاهر ازدست, "Improving electrical conductivity of poly methyl methacrylate by utilization ...", journal of applied polymer scince, 2015.

4-رضا رهبرپور- طاهر ازدست- حمید رهبرپور- سجاد ممقانی, "Feasibility study of friction stir welding of wood–plastic composites", Science and Technology of Welding and Joining, 2014.

5-سجاد ممقانی شیشوان-طاهر ازدست- سامرند رش احمدی, "Investigation of the effect of nanoclay and processing parameters 5 on the tensile strength and hardness of injection molded 6 Acrylonitrile Butadiene Styrene–organoclay nanocomposites", Materials and Design, 2014.

6-زهرا محمدیان- مصطفی رضایی-طاهر ازدست, "Microstructure, physical, and mechanical properties of LDPE/UHMWPE blend foams: An experimental design methodology", Journal of Thermoplastic Composite Materials, 2014.

7-سعید حسین پور داش اتان-طاهر ازدست- سامرند رش احمدی- آروین باقری, "Friction stir spot welding of dissimilar polymethyl methacrylate and acrylonitrile butadiene styrene sheets", Material and Design, 2013.

8-طاهر ازدست, "Microcellular foaming of PVC/NBR Thermoplastic elastomer", Material and manufacturing Processes, 2013.

9-آروین باقری ساعد-طاهر ازدست- علی دنیوی, "An experimental study on mechanical properties of friction stir welded ABS", Material and Design, 2013.

10-عبدالمحمد رضاوند- سامان فلاح کردی-طاهر ازدست, "Experimental Study on the Effect of Adding Carbon Black Powder on Tensile Strength of LDPE Films under Artificial Weathering Condition", Applied Mechanics and Materials, 2013.

11- "An Analytical Study of Constrained Shrinkage of Injection Molded Semi-Crystalline Plastic Parts", Polymer-Plastics Technology and Engineering, 2008.
Conference Papers/Abstracts/Posters (30)

1- "6Effect of Process Parameter on Microstructural, Flexural Strengthe and tensile Strength of Injection Molded Thermoplaqstic Foams", Regional Meeting of Polymer Processing Society, 2010, Istanbul,Turkey.

2- "A Study on Cell Morphology in Microcellular FoamingProcess of Thermoplastic Elastomer", 21st Annual International Conference on Mechanical Engineering-ISME2013, 1392, تهران,ایران.

3- "An An Experimental Study on Residual Stress Distribution of Reinforced Amorphous Thermoplastic Injection Molded Parts", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

4- "An Experimental Study on Residual Stress Distributioin of Rinforced Amorphous Thermoplqastic injection Molded parts.", Regional Meeting of Polymer Processing Society, 2010, Istanbul,Turkey.

5- "Effect of Cooling Time on in-Mold Constrained Shrinkage of Injection Molded Plastic Parts in Consideration of Residual Stresses", Proceedings of the Polymer Processing 24th Annual Meeting, 2008.

6- "Effect of Process Parameters on Microstructure, Flexural Strenght and Tensile Strenght of Injection Molded Thermoplastic Foams", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

7- "Experimental and Numerical Investigation of the Effect of Processing Parameters on Residual Stress of Injection Molded Thermoplastic Parts", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

8- "Experimental and Numerical study on Uniformity of Wall Thickness of Transparent Acrylic in Bubble Inflation and Plug Assistance Thermoforming Processes", 10th Iranian Conference on Manufacturing Engineering, 2010, Babol,Iran.

9- "Experimental Study of the Effect of Processing Parameters on Dimensional Stability of Injection Molded Thermoplastic Foams", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

10- "Experimental Study on the Effects of Short Size and Blowing Agent Amount on the Flexural Strength of Injection Molded Thermoplastic Foams", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

11- "Experimental study on the effects of shot size and blowing agent amount on the Flexural strength of injection molded thermoplastic foams", Regional Meeting of Polymer Processing Society, 2010, Istanbul,Turkey.

12- "Experimentally Investigates the Effect of Injection Pressure and Melt Temperture on Tensile Strenght and Impact Resistance of Injection Molded thermoplastic Foams", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

13- "Exprimental and simulation Study on the Effect of Process Parameters on the Warpage of thin-shell Injection Molded Parts", Polymer Processing Society (PPS2011) Asia-Australia Regional Meeting, 2011, Kish Island,Iran.

14- "Extrusion Foaming of High-Melt-Strength PP with Supercritical Carbon Dioxide I:Cell Nucleation Behaviors", ANTEC, 2008.

15- "Extrusion Foaming of High-Melt-Strength PP with Supercritical Carbon Dioxide-Expansion Behaviors", Biowing Agents and Foaming Processes, 2008.

16- "Influence ofcarbon nanotube on CO2 laser cutting workability of multi-waled corboon nanotube/poloy methyl methaclyrate nanocomposite", ICNN2014, 2014, تهران,ایران.

17- "Injection molding parameters optimization through a Hybrid system of artifical neural network and genetic algorithm", 18th Annual International Conference on Mechanical Engineering, 2010.

18- "Injection Molding Parameters Optimization through a Hybrid System of Artificial Neural Network and Genetic Algorithm", International Conference on Mechanical engineering, 2010, Tehran,Iran.

19- "Investigation Effect of Process Parameters on Residual Stress of Injected Molding Thermoplastic Parts, Experimental and Simulation", Proceeding of the Polymer Processing Society 26th Annual Meeting, 2010.

20- "Investigation of Rackweel hardness and charpy impact tets of injection molded....", ICNN2014, 2014, تهران,ایران.

21- "Numerical Survey of Relevency Between High Grade of Filler With Final Shirinkage of RTM Panel", 10th Iranian Conference on Manufacturing Engineering, 2010, Babol,Iran.

22- "Optimization of LDPE/UHMWPE Blend Foaming Process by Experimental Design Overall Evaluation Criteria (OEC) Method", (ISPST2012) 10th International Seminar on Polymer Science and Technology, 1391, Tehran,Iran.

23- "The Effect of Clay Content on Microstructure and Mechanical Properties of Crosslinked PVC Nanocomposite foams", (ISPST2012) 10th International Seminar on Polymer Science and Technology, 1391, Tehran,Iran.

24- "The Effect of Processing Parameters on the Thermal Conductivity of LDPE/UHMWPE Blend Foams", Polymer Processing Society (PPS2011) Asia-Australia Regional Meeting, 2011, Kish Island,Iran.

25- "The Effect of Shape of Pin on the Mechanical Properties of Welded ABS Sheets with a New Designed Tool in Friction Stir Welding Process", (ISPST2012) 10th International Seminar on Polymer Science and Technology, 1391, Tehran,Iran.

26- "The Processing–Morphologies Relationships in Microcellular Foaming", Polymer Processing Society (PPS2011) Asia-Australia Regional Meeting, 2011, Kish Island,Iran.

27- "Visualization of CO2 Content Effect on Expansion Behaviour of HMS PP Extruded Foam", Iranian Conference on Manufacturing Engineering, 2009.

28- "Visualization of Fiber Orientation in Weldlines of a RTM Part With Different Injection Spots", 10th Iranian Conference on Manufacturing Engineering, 2010, Babol,Irab.

29- "Visualization of Talc Amount Effect on Expansion Behaviour of HMS PP Extruded Foam", Iranian Conference on Manufacturing Engineering, 2009.

30- "Water Assisted Injection Molding Process Parameters Optimization of Polypropylene by Experimental Design Overall Evaluation Criteria (OEC) Method", Internatinal conference of plastic injection molding asia 2011, 2011, بانکوک,تایلند.
Research Projects (2)

1- "Analytical Study of Shrinkage Behaviors of Semicrystalline and Amorphous Injection Molded Thermoplastics", 1388.

2- "Optimization of the effective processing parameters in Water Assisted Injection Molding process of plastic parts", 1390.